Beta Riders Club Discussion Forum

Wow we have 3 Brand new complete 2015 Beta Speedo/ODO/Computer complete with sensor and everything to complete the job $150 Each WOW!!

Has anybody figured out the fix for the inconsistent speedo pickup?

... '14 or '15 300RR Tripmeter adjusts up/down in tenths of a mile? If yes, what's the procedure? I've got a X-Trainer 300 on order & assume the speedo will be the same as the RR. I need tenths adjstment to correct milage when following a roll chart. If the standard speedo doesn't do that, I'll ...

I shimmed my speedo out a bit to fit my TE bars.

I have the Twisted bar on my 300rr with a steering damper. they clear the speedo, but you can't read it easily.

... No joy on disks yet, the Racedisks ones are garbage and only last 2 minutes. Rockwell KTM discs are excellent but you will need to relocate the speedo magnet. I need to find a good source for Galfer disks. I've heard of a few people who have used Dr Shox and not found any advantage, especially ...

... don't clear the caliper mount so replace them with low profile allen heads. The back of the caliper bracket needs a bit of filing to clear the speedo magnet. 5. As far as I know, the forks are on standard springs and valving from the TE, they had been standing for a long time as the oil was ...

... on his 300RR. He said that they fit straight into the Beta yokes and he has fitted a Brembo front brake caliper and KTM front disc to line up the speedo magnet with the caliper mount. He seems well pleased with the improvement. Not sure if he went for open or closed cartridge version. I assume ...

... too much unless you you have access to a good engineer with a lathe. Although the disc is the same diameter and the mountings are the same, the speedo/odo magnet mounting is further out from the spindle than the KTM unit. KTM changed the spindle sizes in 2012(?) so that might complicate matters. ...

... UK KTM forum, trying to fit a KTM front wheel is a world of pain. The front disk is very similar, the only main difference is the position on the speedo trigger magnet. It is about 10mm further away from the centre on the Beta and may be too far out to trigger the pickup. Another project, I think.