injector oil?

Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.

injector oil?

Postby 18lstroup » Fri Mar 09, 2018 11:33 am

anyone have any other good injector oils? i dont like spending 16 bucks for a quart or motul. Anyone ever use maxima super m injector oil? is it good? Any other reasonably priced oils?
18lstroup
 
Posts: 25
Joined: Wed Feb 07, 2018 10:11 am

Re: injector oil?

Postby Regs » Fri Mar 09, 2018 11:56 am

I'm using Amsoil Dominator. It is for injection or premix. Works great. I signed up for the preferred customer plan and pay about a little over $9 a qt.
Regs
 
Posts: 13
Joined: Mon Dec 25, 2017 2:28 pm

Re: injector oil?

Postby Bandicoot » Sat Mar 10, 2018 9:09 pm

Ive been using SuperM since my 16' model I like it but thats just me thou !!
Darren ..
If your not ridin' ... Your dyin' .. !!!
Keep on Roostin'
Bandicoot
 
Posts: 137
Joined: Fri Sep 18, 2015 3:40 am
Location: Melbourne, Australia

Re: injector oil?

Postby andreasds » Mon Mar 12, 2018 8:39 am

I am using Nills....
andreasds
 
Posts: 5
Joined: Wed Oct 25, 2017 7:48 am

Re: injector oil?

Postby Clearvu1 » Mon Mar 19, 2018 11:25 am

I've only used Motul 700 and 800 in my 2016 250RR since new. The clock says 250 hours, still runs like a top. Had the head and pipe off a while back, reasonable carbon deposits (undoubtedly from gasoline) on the piston top, no scratches, blow by or wear evident through the exhaust port, cylinder looks excellent, no lip, no gum in the exhaust valve, still makes 190 psi compression. Oil is cheaper than parts. Beta says use Motul so that's what I use.
Clearvu1
 
Posts: 210
Joined: Mon Oct 05, 2015 7:46 am

Re: injector oil?

Postby njbill » Mon Mar 19, 2018 11:54 am

Clearvu1 wrote:I've only used Motul 700 and 800 in my 2016 250RR since new. The clock says 250 hours, still runs like a top. Had the head and pipe off a while back, reasonable carbon deposits (undoubtedly from gasoline) on the piston top, no scratches, blow by or wear evident through the exhaust port, cylinder looks excellent, no lip, no gum in the exhaust valve, still makes 190 psi compression. Oil is cheaper than parts. Beta says use Motul so that's what I use.


250 hours on the stock piston and rings? If yes, that is excellent. Thanks for posting!
2016 Beta 390 RR
2013 Yamaha WR250R
User avatar
njbill
 
Posts: 78
Joined: Thu Mar 01, 2018 7:40 pm
Location: Cherry Hill, NJ

Re: injector oil?

Postby Mobius » Wed Mar 21, 2018 3:56 am

Clearvu1 wrote:I've only used Motul 700 and 800 in my 2016 250RR since new.


How does Motul 800 go in the injection system? I only ask because it’s labelled Pre-mix only and I have a bottle to use up.
Mobius
 
Posts: 4
Joined: Tue Mar 13, 2018 2:07 am

Re: injector oil?

Postby wwguy » Wed Mar 21, 2018 9:00 am

Assuming that you don't race or ride on the throttle all day ala Steve Holcombe it's worth noting that Motul 800's flashpoint is 485°F (252°C), which significantly increases the likelihood of experiencing more spooge as unburned oil passes through the exhaust.

Some other 2T oil flashpoints for comparison:
Motul 710: 190°F (88°C)
AMSOIL Dominator: 201°F (94°C)
AMSOIL Interceptor: 216°F (102°C)
wwguy
 
Posts: 288
Joined: Thu Apr 28, 2016 12:59 pm
Location: Boise, ID USA


Return to Engine - 2 Stroke

Who is online

Users browsing this forum: No registered users and 69 guests