300rr 22-23 clutch compatibility

Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.

300rr 22-23 clutch compatibility

Postby mike307 » Fri Mar 17, 2023 4:07 am

Hi all , anybody knows if the ktm,husq dds clutch pack is the same as beta uses ? My steel plates are burned and it drags , hard to find neutral .. thanks
mike307
 
Posts: 58
Joined: Wed Jul 20, 2016 11:58 am
Location: Slovakia , Kosice

Re: 300rr 22-23 clutch compatibility

Postby Hyde » Fri Mar 17, 2023 6:53 am

I've owned allot of Beta's nd other than breaking fibers on the 125, those clutches are bullet proof, especially the newer DDS.

Try a lighter gear oil or dextron ATF, Rotella will make it drag.

The steels are unique.
23" 250RE
21' 350RE
20', 200rr, gone
20', 250rr, Ye-haw !
18', 250rr,gone
18' 125rr, KYB forks, gone
16' 250rr, KYB forks-sold
15' 250rr RE-sold
14' 450rr, gone
14' 250rr-sold
14' 450rr KYB forks.
Hyde
 
Posts: 389
Joined: Wed Sep 04, 2013 6:45 am

Re: 300rr 22-23 clutch compatibility

Postby fenderworks » Fri Mar 17, 2023 1:51 pm

Also you can try to bleed the clutch system of air. Make sure the nut is tight near the clutch reservoir. i have had air leak in that area before.
fenderworks
fenderworks
 
Posts: 135
Joined: Thu Jun 06, 2019 7:07 pm
Location: pueblo, colorado usa

Re: 300rr 22-23 clutch compatibility

Postby mike307 » Wed Mar 22, 2023 1:40 pm

I have back bleeded the system , no air in system , nothing ,then i have cleaned the steel discs with 600grit sand paper , new fuchs 10w50 oil and bingo , like new .
mike307
 
Posts: 58
Joined: Wed Jul 20, 2016 11:58 am
Location: Slovakia , Kosice

Re: 300rr 22-23 clutch compatibility

Postby fenderworks » Thu Mar 23, 2023 1:42 pm

Glad you got it fixed!
fenderworks
fenderworks
 
Posts: 135
Joined: Thu Jun 06, 2019 7:07 pm
Location: pueblo, colorado usa


Return to Engine - 2 Stroke

Who is online

Users browsing this forum: Google [Bot] and 55 guests