Rekluse install

[Mslow]

Anyone here with the core 3.0 in the 2014 300RR?
If so, can you please tell me if your rekluse throw out came with two washers and a bearing? Mine only had one washer and the bearing and of course they were closed by the time I got to call them.

[Darkside]

I just installed one. 2 washers and a bearing. also you only install 6 fibers

[Mslow]

Figured as much, considering I was planning on doing a hare scramble this Sunday...guess I'll be waiting til the following weekend now unless rekluse pulls off a miracle in getting to me by tomorrow afternoon. Still need to break it in and set it up.

[Darkside]

check to see if the stock washer fits.

[Mslow]

check to see if the stock washer fits.

First thing I did, the diameter on the two throw outs were different.
Called rekluse and they treated me like a pro rider and are overnighting a new washer, sweet!

[snatch]

Mine only came with one washer,installed with one but clutch wouldnt engage fully. So added the original Beta one and worked fine.

[Enmerdeur]

First thing I did, the diameter on the two throw outs were different.
Called rekluse and they treated me like a pro rider and are overnighting a new washer, sweet!

Rekluse is first rate on customer service.

[dirtbird]

Mine only came with one washer,installed with one but clutch wouldnt engage fully. So added the original Beta one and worked fine.

Same for me with an early EXP2 kit. OEM washer has a different OD but ID is almost the same.

Most difficult part is to remove the small circlip from OEM throwout....

[Mslow]

Installed and works perfect, just need to break it in and get it dialed in now.
Missed the hare scramble this past weekend with a nasty sinus infection that had me on my ass...damn winter.