dirtbird wrote:snatch wrote:Well friction plates arrived, but were such a tight fit in the grooves on the basket I had to file edges down to help them fit.
All back together but Rekluse is still not working, clutch engages but wont work as a 'Rekluse'.
Had it apart 3 times , rebled clutch and still cant work it out. Have way to much free play at the lever but have no more adjustment ,
Going to strip down again tomorrow and measure thickness of new plates compared to old one.
Anyone have any ideas
If you run out of adjustment (allen bolt on the slave cylinder) then put the washer from the OEM throwout on top of the the Rekluse one.
Is your clutch EXP2 or 3?
Mine is an early 2 and I had to use the extra washer but when I installed an EXP3 it was perfect.
Enmerdeur wrote:Barnett now has clutch plates listed for the Beta 2T
http://www.barnettclutches.com/2050/beta/0/0/2014-beta-300-2-t.html
Still pricey at $116 for a set of frictions.
redrider wrote:YAMAHA 450 AND BETA 300 RR HAVE SAME PART NUMBER AT BARNETT. 301-90-10040. Looking for cheaper friction plates, maybe yamaha oem?
Users browsing this forum: Google [Bot] and 236 guests