2 stroke rubber mount

Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.

2 stroke rubber mount

Postby little_wing » Sat Jan 18, 2020 12:16 pm

srt00699_480x480.jpg
srt00699_480x480.jpg (5.24 KiB) Viewed 3285 times

hey all,
so the SRT mounts that are $ 20 each only last about a season.
yes I have done new springs and orings and made sure the pipe is not crazy bent
I don't bang my pipe as I don't ride that hard.
is there any better mounts out there that I should look at and any one have links????
2015 beta 250RR
little_wing
 
Posts: 208
Joined: Tue Mar 22, 2016 1:19 pm
Location: ontario canada

Re: 2 stroke rubber mount

Postby wwguy » Sat Jan 18, 2020 4:08 pm

FWIW I have 300+ hours on my 2016, and I've never had one of those rubber mounts fail. I'm not very gentle with my bike either. (My bike likes it it rough, but our relationship is 100% consensual!)

Image
wwguy
 
Posts: 288
Joined: Thu Apr 28, 2016 12:59 pm
Location: Boise, ID USA

Re: 2 stroke rubber mount

Postby little_wing » Tue Jan 21, 2020 7:11 am

thanks for the ride report and picture.
does any one else have information on 2 stroke rubber exhaust mounts that are better then the factory or the SRT ones???
2015 beta 250RR
little_wing
 
Posts: 208
Joined: Tue Mar 22, 2016 1:19 pm
Location: ontario canada

Re: 2 stroke rubber mount

Postby Darkside » Tue Jan 21, 2020 10:52 am

whenever beta has an inferior part. you just replace it with a ktm part
Randy
2018 390 rrs, 2014 300 rr re, 2010 ktm 450 exc
Darkside
 
Posts: 449
Joined: Tue Jul 30, 2013 12:53 pm
Location: SF Bay Area

Re: 2 stroke rubber mount

Postby NZMarkb » Tue Jan 21, 2020 10:14 pm

Stop spraying it with CRC ;)
I found WD40 much easier on decals and rubber parts
If your not willing to stand behind our troops
Then try standing in front of them
NZMarkb
 
Posts: 154
Joined: Sun Dec 13, 2015 6:06 pm
Location: Auckland New Zealand


Return to Engine - 2 Stroke

Who is online

Users browsing this forum: No registered users and 240 guests