Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.
by Toshy1 » Fri Feb 12, 2021 5:56 pm
I’ve got my 2014 300rr apart and was checking the crank and I noticed that the manual states the distance across the 2 shoulders to be 62mm +~ .5mm. I measure mine at 60.17mm. Would this cause any problems? It’s the original crank with 180 hrs on it the main bearings were rusted and noisy.
-
Toshy1
-
- Posts: 9
- Joined: Wed Jul 31, 2019 6:49 am
Return to Engine - 2 Stroke
Who is online
Users browsing this forum: No registered users and 73 guests