Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.
by Bones357 » Tue Aug 17, 2021 10:46 am
Just wanted to share this:
I just did the first gear oil change on my ‘21 XTrainer at 5.1 hours. There was VERY LITTLE oil from the factory. I drained just over 110 CCs. This was quite surprising. The manual calls for 850.
I got in around 840 before oil appeared at the oil level check hole.
This is probably something that my dealer and I should have checked.
-
Bones357
-
- Posts: 3
- Joined: Thu Nov 19, 2020 6:37 am
- Location: Western PA
by twowheels » Wed Aug 25, 2021 9:12 pm
Sounds like your dealer didn't prep the bike before you bought it ... they all come with a little residual oil in the transmission, but the dealer is supposed to drain that and fill it with 800cc as part of the build.
-
twowheels
-
- Posts: 1226
- Joined: Tue Jul 30, 2013 7:48 am
- Location: In the woods near Milford, MI
-
by Bones357 » Thu Aug 26, 2021 2:30 pm
Yeah, like I said…dealer should have caught it, but I also should have checked myself. Live and learn.
-
Bones357
-
- Posts: 3
- Joined: Thu Nov 19, 2020 6:37 am
- Location: Western PA
Return to Engine - 2 Stroke
Who is online
Users browsing this forum: No registered users and 51 guests