Page 1 of 1

300rr 22-23 clutch compatibility

PostPosted: Fri Mar 17, 2023 4:07 am
by mike307
Hi all , anybody knows if the ktm,husq dds clutch pack is the same as beta uses ? My steel plates are burned and it drags , hard to find neutral .. thanks

Re: 300rr 22-23 clutch compatibility

PostPosted: Fri Mar 17, 2023 6:53 am
by Hyde
I've owned allot of Beta's nd other than breaking fibers on the 125, those clutches are bullet proof, especially the newer DDS.

Try a lighter gear oil or dextron ATF, Rotella will make it drag.

The steels are unique.

Re: 300rr 22-23 clutch compatibility

PostPosted: Fri Mar 17, 2023 1:51 pm
by fenderworks
Also you can try to bleed the clutch system of air. Make sure the nut is tight near the clutch reservoir. i have had air leak in that area before.

Re: 300rr 22-23 clutch compatibility

PostPosted: Wed Mar 22, 2023 1:40 pm
by mike307
I have back bleeded the system , no air in system , nothing ,then i have cleaned the steel discs with 600grit sand paper , new fuchs 10w50 oil and bingo , like new .

Re: 300rr 22-23 clutch compatibility

PostPosted: Thu Mar 23, 2023 1:42 pm
by fenderworks
Glad you got it fixed!