Alright flame away at my stupid question but here it goes. I'm installing a Rekluse Radius CX clutch in my 500 RR-S and need to pre soak my clutch plates. Since this is my first bike with two separate oil cases I just want to make sure I'm using the right oil.
My question is, Do I use Transoil or motor oil for a clutch soak?
I believe that the clutch is lubricated by the same oil as the gear case so in that case I would do the clutch soak with the Motul Transoil Expert 10W40? I'm assuming that the engine oil Motul 4T 7100 10W50 does not lubricate the clutch plates in this engine?