300 carb settings uk

[Ptssmith]

To be honest i asked i asked one of the dealers over here and that was what he sent me.
I may try some other jetting on the bike but it does seem to run better using the ones he sent.
What are you running GMP?

[GMP]

Stock jetting, for US bikes anyway. 35p, N2ZJ#3, 165M, AS 1.5. I'm just curious why yours is so different, fuel maybe? For GGs this variation was the norm as tolerances were loose, but every Beta seems to like the same jetting or corrected by the chart.

[Hubert Carpet]

What is the octane rating for US pump gas? In the UK the standard unleaded is 95 and "Super" is 97.

[Ptssmith]

Stock jetting, for US bikes anyway. 35p, N2ZJ#3, 165M, AS 1.5. I'm just curious why yours is so different, fuel maybe? For GGs this variation was the norm as tolerances were loose, but every Beta seems to like the same jetting or corrected by the chart.

I was running 38p, N2ZJ#3, 168M, AS 1.5. It ran well with those settings, what is the difference in the N2ZW and the N2ZJ needles?

[GMP]

N2ZJ is one dia leaner than N2ZW.
Our fuel rating system is different but fuel should be close. We have 10% ethanol in most fuel so if anything we should run leaner if you have straight fuel with no oxygenates.

[Mxdave]

Ptsmith you still liking that jetting settings? I got the same jets a year ago and still not fitted as I'm finishing stock fine. Was gonna try the new ones for the fun of it.

[NZMarkb]

Hi All
Does any one have any jetting settings for the new 16 300 race edition
Should see my new bike any day now

[Gibnut]

Hi All
Does any one have any jetting subjections for the new 16 300 race edition
Should see my new bike any day now

A lot of 300 riders are onto NECJ #3, 35p, 165m, a/s 1.5.

[NZMarkb]

Thanks mate

[Justsam]

Stock needle and position. 170 main 38 pilot a/s 1.5