Jetting 2015 250 RR

Jetting, Reeds, Air Filters, etc.

Re: Jetting 2015 250 RR

Postby worstell » Wed Dec 14, 2016 9:32 am

Tedo wrote:Thanks for the help everyone. my altitude is between 500 and 900 feet. I finally got my jetting perfect. I ended up with a 35 pilot and a 168 Main with the needle on the top clip putting the needle as far down as it will go. I have the air screw at 3/4 turn out and the bike is very clean and crisp at all RPM. I will probably go to a 165 for the summertime Heat because it is a little on the rich side but it's getting plenty of lubrication like that. again thanks for everyone who commented and helped me out.


Tedo- What needle are you running with that?
2018 Beta 390 RR-S
2016 Beta 250RR sold
2013 KTM 350 XCF-W sold
worstell
 
Posts: 66
Joined: Fri Sep 02, 2016 11:27 am
Location: Evergreen, CO

Previous

Return to Intake/Carburetion - 2 stroke

Who is online

Users browsing this forum: No registered users and 65 guests