redbone477 wrote:Just got my bike, bought it new/used, I say that because it only had 1.6 miles on it. Nipples were still on the tires. It had old gas in it that I drained. I put new gas in it with some sea foam to clean the system. Having a little trouble adjusting the idle. It will idle once it is warm it just needs to be a little higher. The jetting is stock, the air screw is @ 1 1/2 turns out. When I adjust the idle screw it doesn't raise the rpms. So I guess my question is do I need to pull the carb to do a really good cleaning? Its been awhile since I messed with a carb, but do I have to take it off the bike to work on it or is it possible to do what I need to with it on the bike? Last ? for this session, I know you get some spoog/drool from a 2 stroke, but today after my ride I noticed what seemed to be some drool splatter on the back side of the cylinder, I'm hoping that it is possibly coming from the joint between the pipe and the silencer. Any ideas? Thanks
Return to Intake/Carburetion - 2 stroke
Users browsing this forum: No registered users and 66 guests