Jetting, Reeds, Air Filters, etc.
by Budge » Mon Aug 28, 2017 4:24 am
Does seen very strange , They have tried fitting a complete carb from a new bike but that did not make any difference . Will keep you updated when i know .
2018 Beta 300 RR
-
Budge
-
- Posts: 9
- Joined: Sun Jul 23, 2017 8:25 am
by Sixshooter » Tue Sep 26, 2017 10:09 am
Bike will not idle. Warmed it up turned screws per manual, do I need a pilot jet ?
-
Sixshooter
-
- Posts: 1
- Joined: Fri Aug 25, 2017 10:55 am
by aj_mariner » Tue Sep 26, 2017 12:21 pm
Was it idling fine before or is it s new bike?
‘17 300 RE - gone
‘22 300 RE
-
aj_mariner
-
- Posts: 755
- Joined: Wed May 17, 2017 12:53 pm
- Location: Glacier, WA
by andreasds » Mon Mar 12, 2018 6:39 am
I can't find "online" the Jetting Chart for 2017 300RR?
-
andreasds
-
- Posts: 5
- Joined: Wed Oct 25, 2017 7:48 am
by moto367 » Mon Mar 12, 2018 6:50 am
-
moto367
-
- Posts: 96
- Joined: Mon Feb 22, 2016 9:04 am
by andreasds » Mon Mar 12, 2018 7:13 am
Nop there is nothing there... the only available is for 2013 Beta 300 RR Carburetor Jetting Chart
-
andreasds
-
- Posts: 5
- Joined: Wed Oct 25, 2017 7:48 am
by aj_mariner » Mon Mar 12, 2018 7:19 am
You can use the 2015 chart...the compression ratios are the same. Its just a starting point anyways.
‘17 300 RE - gone
‘22 300 RE
-
aj_mariner
-
- Posts: 755
- Joined: Wed May 17, 2017 12:53 pm
- Location: Glacier, WA
by andreasds » Mon Mar 12, 2018 7:29 am
aj_mariner wrote:You can use the 2015 chart...the compression ratios are the same. Its just a starting point anyways.
OK thanks, a lot...
Any suggestion for... We will start from 200meters to 1500meters what should be the correct setup?
-
andreasds
-
- Posts: 5
- Joined: Wed Oct 25, 2017 7:48 am
by aj_mariner » Mon Mar 12, 2018 9:00 am
andreasds wrote:aj_mariner wrote:You can use the 2015 chart...the compression ratios are the same. Its just a starting point anyways.
OK thanks, a lot...
Any suggestion for... We will start from 200meters to 1500meters what should be the correct setup?
Temps? Is your 300 using the oil injection or premix in the tank?
‘17 300 RE - gone
‘22 300 RE
-
aj_mariner
-
- Posts: 755
- Joined: Wed May 17, 2017 12:53 pm
- Location: Glacier, WA
by andreasds » Mon Mar 12, 2018 9:02 am
aj_mariner wrote:andreasds wrote:aj_mariner wrote:You can use the 2015 chart...the compression ratios are the same. Its just a starting point anyways.
OK thanks, a lot...
Any suggestion for... We will start from 200meters to 1500meters what should be the correct setup?
Temps? Is your 300 using the oil injection or premix in the tank?
Temps 10 - 20 Celcius my BETA has the oil injection system!
-
andreasds
-
- Posts: 5
- Joined: Wed Oct 25, 2017 7:48 am
Return to Intake/Carburetion - 2 stroke
Who is online
Users browsing this forum: Google [Bot], Majestic-12 [Bot] and 62 guests