2020 xtrainer jetting and mileage
Posted: Mon Apr 06, 2020 1:40 pm
ok so here is what i have done:
lowered float level,
main jet to 148,
pilot stays the same at 35,
needle #2 position from top,
air adjust screw to 2 turns out,
idle screw set to good idle rpm.
bike runs well.......now i will be chasing gas mileage.
yesterday ran the gas tank dry at 51 miles....i would like to try to get 50 miles and then have reserve to get me home.
average speed was 11 mph. elevation right at 6000 ft.
what do you all think? any ideas for increased miles per tank?
thanks in advance,
bike has 240 miles and 15 hours
lowered float level,
main jet to 148,
pilot stays the same at 35,
needle #2 position from top,
air adjust screw to 2 turns out,
idle screw set to good idle rpm.
bike runs well.......now i will be chasing gas mileage.
yesterday ran the gas tank dry at 51 miles....i would like to try to get 50 miles and then have reserve to get me home.
average speed was 11 mph. elevation right at 6000 ft.
what do you all think? any ideas for increased miles per tank?
thanks in advance,
bike has 240 miles and 15 hours