Where to source some electrical components!?

Lighting, Ignition, Wiring, Plugs, etc.

Where to source some electrical components!?

Postby beta250rrowner » Sat Sep 25, 2021 11:22 pm

I'm thinking ahead here, I've got a problem with my 250rr not sparking and I fear it's going to be a "diagnosis by replacement" scenario. I can't find anything other than the stator on eBay and it's from China. It might be worth a go but apart from that I can't find ignition coils or cdi units. Would the parts from a KTM 250exc be a direct fit? They are basically the same bike. I can't imagine dealer prices being reasonable for this, the network seems very amateur.
beta250rrowner
 
Posts: 53
Joined: Sat Oct 20, 2018 11:59 am

Re: Where to source some electrical components!?

Postby oldman » Sun Sep 26, 2021 5:01 pm

I would recommend to first replace the spark plug. If their is still no spark check the ohm resistances of the stator, the ignition pick up, and the ignition coil primary and secondary winding as per the readings listed for your bike at Beta USA, support, service manual for your bike. A cheapo ohm meter from Harbor Freight and 30 minutes of testing should give you a good idea whether or not these parts involved in making the spark happen are working. If they pass the test then you may need a new cdi unit.
Current rides, 21 Beta 200RR, 19 Beta 500rrs, 01 Honda 200r, 99 GasGas TXT321, 82 Yamaha YZ490, 83 Yamaha YZ250, 59 Harley Davidson ST165,
Past rides to long to list.
oldman
 
Posts: 85
Joined: Wed May 13, 2015 8:00 pm

Re: Where to source some electrical components!?

Postby JoeMaico » Tue Dec 28, 2021 4:38 am

I would agree to check everything first. Paying close attention to clean all of the exposed contacts. As for replacements, I have "heard" that the KTM Coils on the 2 strokes are a direct replacement. At least on 2016 and 2017 models. Newer ones I do not know.

joe
JoeMaico
 
Posts: 115
Joined: Mon Mar 07, 2016 6:46 am

Re: Where to source some electrical components!?

Postby Hyde » Tue Dec 28, 2021 8:46 am

I've a stator I'd sell. Off a 20' 250rr, used once.

$130 shipped in the lower USA.
23" 250RE
21' 350RE
20', 200rr, gone
20', 250rr, Ye-haw !
18', 250rr,gone
18' 125rr, KYB forks, gone
16' 250rr, KYB forks-sold
15' 250rr RE-sold
14' 450rr, gone
14' 250rr-sold
14' 450rr KYB forks.
Hyde
 
Posts: 389
Joined: Wed Sep 04, 2013 6:45 am

Re: Where to source some electrical components!?

Postby Rob578 » Wed Jan 05, 2022 2:12 pm

Have you found the problem?
Rob578
 
Posts: 90
Joined: Wed Mar 25, 2015 11:31 am


Return to Electrical & Wiring

Who is online

Users browsing this forum: No registered users and 21 guests

cron