2017 Xtrainer Wiring Diagram - in colour

[AndyBeta]

Hi All. First post. I'm wanting to love my Xtrainer, but already have some issues
Anyhow, as part of my fault finding I labelled and coloured in the wiring diagram - note I've not verified it against the bike, and suspect it's not perfect e.g. a red wire from the dash going to ground - Really?!
Also had to reduce file size to upload it so quality might be reduced slightly.
Hopefully helpful to some of you...

2017 Xtrainer Wiring Diagram - in colour

Xtrainer 2017 coloured circuit diagram 150dpi not checked.jpg (420.9 KiB) Viewed 4230 times

[wwguy]

Good catch. I think that wiring diagram in the 2018 Xtrainer Owner's Manual is incorrect.

This 2017 Xtrainer diagram from Beta's OI Troubleshooting Guide shows both of those red wires going where you'd expect:

2018-05-22_16-41-55.jpg (97.78 KiB) Viewed 4225 times

[XC103]

Thank you.
This wiring diagram is great.
I am working on getting the turn signals to work on my 2018 Xtrainer. (Love the bike)
I have been looking at the supplied W/D and it is hard to use, this helps tremendously.
I have ordered a 'Unit Turn Signal Lamp' box, this should solve why I am not getting power to the LEDs.
Beta did not supply the unit with the bike.