Handlebars Changed now bike turns over but no start.

[Antimullet]

2017 500 RR-S.
Obviously I’ll start troubleshooting with wiring on the bars but any ideas?


Cranks fine. No start. Seen the FI light come on but it quickly went out.

Almost like no spark.

[Antimullet]

Actually to be exact it drove perfect right after the bar swap.

Then today it just cranks and doesn’t start. FI light is on continuously now.

[twowheels]

The two easiest things to check are 1) whether the kill-switch pod is grounded out or 2) whether the mass of grounds in the bundle that runs up the side of the frame by the steering head has been compromised.

[Marty Moose]

Crushed a wire under the bars ? Seen it before

MM