OK I bought some symatic grip heaters. Ran a negative wire to battery adn tapped into the "brwon" wire on head light. All worked fine
https://www.amazon.com/Heat-Demon-Exter ... B001AWRCJO
Then I bought this and it works great. Problem is the motominded guys strongly recommended I run a separate power wire with fuse for the grip heaters. So I bought a little wire assembly at napa with a 20 fuse.
https://www.motominded.com/collections/ ... d-4-stroke
I did just than then go to start the bike and not even a click. My earthx battery just apparently shut off. Sure enough the fuse was toast.
What did I do wrong?