Won't rev when cold

Lighting, Ignition, Wiring, Plugs, etc.

Re: Won't rev when cold

Postby Gman2528 » Sun Jul 19, 2020 10:58 pm

Hi trail rider, I agree but I'm getting charge off the regulator / rectifier. I'm not ruling anything out and like a numpty I pinched one of the carb breather tubes when dropping the engine back into position. That will certainly not help as a blocked breather can also be symptomatic of what I'm seeing.
Gman2528
 
Posts: 8
Joined: Sun Jul 12, 2020 11:49 am

Re: Won't rev when cold

Postby Gman2528 » Mon Jul 20, 2020 12:41 pm

Checked the battery today after letting it stand for 24 hours. Measured 12.75 volts so is holding charge. I'll post an update in a few days time. Thanks for the tips so far
Gman2528
 
Posts: 8
Joined: Sun Jul 12, 2020 11:49 am

Re: Won't rev when cold

Postby bruce991 » Thu Dec 24, 2020 4:58 pm

How can you rule out the carb and then later say you took apart for first time? And screw driver on the main? The main has no screw slot the pilot does. Think you are in too deep for your mechanical knowledge, and should be at a shop that can rule out voltage regulator and have fresh eyes to look over the bike.
bruce991
 
Posts: 8
Joined: Thu Dec 24, 2020 1:56 pm
Location: Barryton, Michigan

Previous

Return to Electrical & Wiring

Who is online

Users browsing this forum: No registered users and 75 guests