Hi, I just picked up a used 2020 300 Race and it has some starting issues I could use some help with. When I picked it up the battery was dead from the bike sitting too long we thought. The bike bump starts fine. It did start once using the button after that but then it just clicks on subsequent tries.
I installed a new fully charged Antigravity 8 cell. The relay clicks but starter does not spin.
I checked voltage on starter side of relay when pushing the button. It was getting around 5v. I disconnected the hot wire from the starter and could get 12+V to the end of the wire. When I direct connect a battery to the starter it does nothing.
Is there anything else I can try? I've ordered a new starter and am not looking forward to swapping it out.
Thanks!