cleaning up the bars
5 posts
• Page 1 of 1
cleaning up the bars
by Alta Redneck » Sat Apr 04, 2015 1:49 pm
I was just wondering if anyone has a suggestion on how to get rid of all the switches on the left side of the bars. I'm going to get rid of the horn and would like just a simple light and kill switch. From what I've read there's a beta race harness, but it gets rid of the computer.
- Alta Redneck
- Posts: 25
- Joined: Sat Jan 24, 2015 9:10 pm
Re: cleaning up the bars
by Darkside » Sat Apr 04, 2015 2:34 pm
sicass racing narrow switch cluster
Randy
2018 390 rrs, 2014 300 rr re, 2010 ktm 450 exc
2018 390 rrs, 2014 300 rr re, 2010 ktm 450 exc
- Darkside
- Posts: 449
- Joined: Tue Jul 30, 2013 12:53 pm
- Location: SF Bay Area
Re: cleaning up the bars
by Rider793 » Mon Apr 06, 2015 9:54 pm
.
Last edited by Rider793 on Tue Apr 07, 2015 10:40 am, edited 1 time in total.
Keith
2015 Beta 300 RR Race
2009 Husqvarna WR144
2015 Beta 300 RR Race
2009 Husqvarna WR144
-
Rider793 - Posts: 26
- Joined: Mon Nov 11, 2013 12:23 pm
- Location: Minnesota
Re: cleaning up the bars
by twowheels » Tue Apr 07, 2015 12:22 am
Darkside wrote:sicass racing narrow switch cluster
^^^^ This, but you also need the kill/start combo for the right hand bar. We have both.
http://www.afterhourscycle.com by PlusOnePerformance - Superior Service the World Over
Michigan's Vertigo, Beta and TM Race Headquarters
Michigan's Vertigo, Beta and TM Race Headquarters
- twowheels
- Posts: 1226
- Joined: Tue Jul 30, 2013 7:48 am
- Location: In the woods near Milford, MI
Re: cleaning up the bars
by redrider » Tue Apr 07, 2015 5:41 am
I copied this. Is an awesome setup!
viewtopic.php?f=16&t=43&start=10
I also moved the oem start switch to the left side and wired it as the kill switch. Only 3 switches on the bars now, one on left & 2 in 1 combo on the right. Clean! The top button on the right is lock on/off for the map switch. Perfect setup. The sicass switch is identical but I don't think it locks on/off like the switch in the above thread.
viewtopic.php?f=16&t=43&start=10
I also moved the oem start switch to the left side and wired it as the kill switch. Only 3 switches on the bars now, one on left & 2 in 1 combo on the right. Clean! The top button on the right is lock on/off for the map switch. Perfect setup. The sicass switch is identical but I don't think it locks on/off like the switch in the above thread.
- redrider
- Posts: 259
- Joined: Wed Jul 16, 2014 4:06 pm
- Location: The Old Dominion.
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 49 guests