by GMP » Fri May 23, 2014 6:12 am
I was unsuccessful in fitting the shorter KYB SSS springs to the Marzocchi compression unit. The ID is too small(3mm less) to properly fit the spring centering shoulder washer in the inside of the piston, and rubbing on the alloy hex portion during compression was also a concern. I was able to slightly adjust the compression shaft length for approx 1.5mm free play with the stock springs and no problems at all with the compression adjuster. So I got almost what I was after and will see how it affects the feel at lower to mid PFP settings.
Glenn
'13 Beta 300RR Racing