Enduro spec inserts

[200boy]

I just got a pair of my betta I can't get them to go into the fork is there a trick that I don't know. Will use the grease and we can get them in about 2 in and they stop

[hawaiidirtrider]

My friend says his went in easy. Call enduro spec. A pic or vid would help.

[DaddyTJ]

Did you remove the base valve? They just drop into the tubes.Very easy job.

[200boy]

I finally got the in. The o ring was too big... I have heard that there posed to be really. I guess my forks didn't get the memo

[typeone]

i had the same issue, thought they didn't seat right ... talked with Warren who said they use a small battery powered impact to zip them on ... problem solved. at first i thought the o-ring was too small! but it's a nice tight fit.

you'll dig 'em. i love my inserts. transformed the forks.

[200boy]

What was your setting?

[typeone]

What was your setting?

do you mean where are my clickers at? if yes, i'm not sure but can check. just ran them with Warrens settings as supplied, which were great! i did recently go 2-clicks out on comp for some slower tech trails ... if memory serves me correct, Warren supplied both reb + comp pretty much in the middle.

[200boy]

Yes mine was 14 on the rebound and 12 on the compression, just wondering what you ended up with