Xtrainer rear spring
Posted:
Mon Apr 18, 2022 12:46 amby F5 Dave
So fitted an ohlins spring an experiment with machined adapter. Too wide, rubs against airbox boot. Ran out of time to fit bottom bolts. Concern spring too low as adapter needed to go low on lower side.
Ideas?
Re: Xtrainer rear spring
Posted:
Mon Apr 18, 2022 3:36 pmby webmaster
I would check with cannon racecraft to see if they can make a custom spring for you... They are in USA.
https://www.cannonracecraft.com/jeff
Re: Xtrainer rear spring
Posted:
Thu Apr 21, 2022 10:32 amby wwguy
Eibach offers a wide variety of springs that may work for your application. I've used them previously on a couple of other bikes.
https://eibach.com/us/c-103-motorsport- ... m-ers.html
Re: Xtrainer rear spring
Posted:
Fri Apr 22, 2022 5:18 pmby F5 Dave
Actually I googled up a 5.8 on Beta Auss which at least is closer for freight.