Rebound/compression setting for Sachs fork

[Dyrtmon]

After chasing my tail working with the settings on my Sachs fork as it would occasionally bottom (2013 300RR), I decided to do an oil change mainly to find out what the oil level was. Sure enough it was low, 160 mm from the top. I had the seals replaced and evidently the guy didn't fill it properly. Changed the oil and set it at 130mm from the top, 5w oil.

What would a good starting point be for the compression and rebound clickers?

[Timber]

I'll have to see if I can find any of my old notes for that bike. 16 out from full closed should get you close if my memory serves me right.

[Dyrtmon]

Thanks, I was gonna start at 12..

[bigoscycles]

Between 15 and 20 Out. Oil Height works good around 110 to 120.