Sach forks topping out? E.g. Clunking when fully extended?

[Dyrtmon]

Okay - I have what appears to be a dumb question as I'm no suspension expert:

What is a top out spring? I have had my Sachs forks apart on my 13 300RR and there's only one spring - is that the top out spring?

BTW, during last weeks desert ride I did notice an occasional clunk upon full extension, thought maybe I had a loose handlebar mount but all was tight. Think I'll delve into the forks but need to know what a top out spring is first.

I also ran across a youtube vid that showed the complete breakdown and re sealing of a Sachs fork but can't find it....Anyone know of that vid?

thx

Found the vid....I'm assuming the "top out" spring is the only spring in the OC Sachs fork, correct?

[GMP]

Its internal to the cartridge, over the damper rod below the rebound tap.

[Dyrtmon]

Thank you Glenn.

[little_wing]

my 2015 250rr forks just broke the top out springs.....
my inner rod is scratched ( the rod that the top out spring is on)
beta Canada only sells the cartridge as a complete unit and not just the parts I need.
has any one found a better way.
yes I read that I should up grade to the 2016 spring but I need more then the spring

[typeone]

my 2015 250rr forks just broke the top out springs.....
my inner rod is scratched ( the rod that the top out spring is on)
beta Canada only sells the cartridge as a complete unit and not just the parts I need.
has any one found a better way.
yes I read that I should up grade to the 2016 spring but I need more then the spring

i have a set of complete cartridges from a 2013 w/OC forks if you're interested. cost of shipping might be an issue but i would let them go cheap.

[DaddyTJ]

Buy the Enduro Spec inserts! They are awesome

[little_wing]

Buy the Enduro Spec inserts! They are awesome

so they replace the top out springs?

[dirtynenow]

I had this happen on my 15'. Just destroyed the midvalve and chunks ended up in the basevalve. My last two Betas the Sachs stuff went right on ebay before I even rode it.

[typeone]

Buy the Enduro Spec inserts! They are awesome

so they replace the top out springs?

they replace the entire internals, drop-in ready, just use your existing tubes and springs.

i've been running the Enduro Spec inserts as well, totally in love. just like DaddyTJ said, they are awesome.

[little_wing]

hey all I may have came across a fix for this
I made a new post called ""Sach forks Clunking when fully extended? here is a fix"""
read it here http://www.betarider.org/forum/viewtopic.php?f=17&t=3155