Front Disk Guard

[brantsdad]

Does anyone make one in which you DON'T have to remove the front wheel ? ... Would be for a 250rr 2013

[Whiskeythrottle24]

I believe this one from bulletproof designs is held on by the axle nut and another bolt running to the caliper mount... I haven't used it so I can't really say good or bad... but I think that's the only one I can see that you don't have to totally pull the axle shaft off the front wheel. Here's a link, just look for the Beta application....

http://test.bulletproofdesigns.com/bull ... guard.html

[brantsdad]

Thanks whisky

[twowheels]

I believe this one from bulletproof designs is held on by the axle nut and another bolt running to the caliper mount... I haven't used it so I can't really say good or bad... but I think that's the only one I can see that you don't have to totally pull the axle shaft off the front wheel. Here's a link, just look for the Beta application....

http://test.bulletproofdesigns.com/bull ... guard.html

BPD has the front disk guards only for the Sachs-fork-equipped bikes. I hounded them for a while for a Zoke application, but until somebody surrenders a bike for test-fitting they don't have one for the Racing Editions.

[Whiskeythrottle24]

Maybe if they asked Tim from AMBeta would be willing to provide even a used fork etc. to mock up a unit. I know he was able to help out TM Designs over here with that for a chain guide for the 300 RR. Eventually something will happen, just a mater of time

[Phatpat]

Hi, I'm trying to order the Acerbis front disc guard from my local dealer but none of us can figure out which mount to order as there's no info on one being specifically for Beta '13- models. Anyone got any ideas?

Any other similar disc guard can be interesting too but I'd prefer to be able to order it/buy it within the EU due to import fees etc.

[Rider793]

Did Acerbis ever do anything for the Italian Husqvarna's? If so, I would start with the WR125 / CR125. If not, you probably need to look at a different company.

[igc]

Phat pat, I have seen pictures of the Acerbis Guard mounted on a Sachs equipped beta. I recently called Acerbi's usa to see if they could point me in the right direction, but they had no info at all about fitment to the Beta bikes. American Beta has this guard on there website for sale, but at a significant price increase. If you figure out which adapter works please post up.

http://shop.americanbeta.com/p/acerbis- ... uard?pp=12

Ian

[hawaiidirtrider]

Hi, I'm trying to order the Acerbis front disc guard from my local dealer but none of us can figure out which mount to order as there's no info on one being specifically for Beta '13- models. Anyone got any ideas?

Any other similar disc guard can be interesting too but I'd prefer to be able to order it/buy it within the EU due to import fees etc.

Aren't 13, 14, and 15's all the same? Where did you look? Here?

http://shop.americanbeta.com/p/acerbis-front-disc-guard

[Hyde]

This company has exactly what your looking for and it comes with the left hand lower fork guard also.

http://hyderacing.com/store/dirtbike/beta.htm?pid=6