Beta/KTM chain guide mount comparison

[Hubert Carpet]

The KTM guide does not fit the Beta, they are completely different in size. See my post above with the fixing centres.

I have one of each in my toolbox if you need a comparison photo.

[GMP]

Thanks. I was hoping that the linkage KTM swingarm guide tabs would be the same, as yours was stated as being a PDS. Anyway, heading over to my local KTM dealer tonight to have a look see myself.

[Hubert Carpet]

I'm pretty sure they are all the same but I'll be interested to hear if not

[Enmerdeur]

Yes PDS and Linkage KTM's have the same chain guide so no joy.

[GMP]

Yes, I found the same unfortunately. Guess its wait for an aftermarket solution or roll your own. I know I'll be leaving the softer stock guide on until then. It took a pretty good hit on the side with some material loss but swingarm tab is still OK. If it was stiffer I don't think that would be the case. Thanks for your efforts.

[SpeedBlitz]

I recently inquired with Bullet Proof Designs about a Beta version of the swingarm guard and got the following answer:

"We are trying to get a new Beta 300 RR in the shop to work on the front disc guard. They tell us the Marzocchi forks are different and the front disc guard is different. I will have my programmer look at the swingarm and see how difficult it will be to make one. Then I will follow up!
Thanks,
Nate Scott
http://www.bulletproofdesigns.com
816-695-3784"

If I hear back from Nate, I'll post his feedback.