White plastics?

[dirtbird]

Kashima is more of a chocolate bronze color

You're right but they don't look std Sachs as well.

[Darkside]

funny, individual tastes. I'm just the opposite. I don't like the all white 2018 390. So I put on a red fender and shrouds to match my older RE 300

[twowheels]

Speaking of white plastics, we've got tons of the stuff - especially rad shrouds. If you need some plastic PM me.

[Darkside]

^^ Hey Steve, Is it possible to buy stock and RE graphics for just the shrouds? or do I have to get the whole set

[twowheels]

^^ Hey Steve, Is it possible to buy stock and RE graphics for just the shrouds? or do I have to get the whole set

Whole sets unfortunately, but the pricing is pretty decent.

[aj_mariner]

Benjamin Ried had some sick Red Bull graphics on his Beta for this years TKO. Wish those were available to us hacks as well

[Goatse]

Benjamin Ried had some sick Red Bull graphics on his Beta for this years TKO. Wish those were available to us hacks as well

Anything is available if you don't go with the off the shelf kits. The quality is probably 10x what came on my RE as well.

[DaddyTJ]

I put the 2018 race edition graphics and plastic on my 2015, needed the 18 air box

I have been looking at parts on the micro fish and it does appear that the filter box, as Beta calls it, is a different part. Do all the older bike internals match up and work with the newer 2018 plastic?

Anyone know of other fork protectors that work on the Sach forks? I use the Mud Scrappers and they hit the ridge on the Beta fork protectors. I have added hose clamps to hold the mud scrappers in place and it seems to be working great. But they do rub the fork protectors when the fork gets close to bottoming.

[twowheels]

I put the 2018 race edition graphics and plastic on my 2015, needed the 18 air box

I have been looking at parts on the micro fish and it does appear that the filter box, as Beta calls it, is a different part. Do all the older bike internals match up and work with the newer 2018 plastic?

Anyone know of other fork protectors that work on the Sach forks? I use the Mud Scrappers and they hit the ridge on the Beta fork protectors. I have added hose clamps to hold the mud scrappers in place and it seems to be working great. But they do rub the fork protectors when the fork gets close to bottoming.

The tool kit compartment was eliminated on the 2018s, as was the side number plate that used to serve as its outer cover, so that's why the airbox changed.

I used to run the older GasGas fork guards on the Betas because they provided full coverage and had a nifty closing feature so that you could get them off and on without removing the fork itself (as was necessary if you used KTM full-coverage guards).

[Ben500RS]

Top of the World.jpg (363.83 KiB) Viewed 6735 times