Beta Oversize Kickstand Pad Install

[adamsrk15]

https://youtu.be/qwcNucXmF0c

I am not a professional videographer, but I hope this helps someone.

[Abercrombie]

Nice work! I love how great guys on these forums are so helpful and willing to share information.

I installed mine last year and it went just as easy. I decided to make it stronger and very permanent by filling all the voids between the kickstand and pad with JB weld before screwing the kickstand pad on.

[adamsrk15]

Nice work! I love how great guys on these forums are so helpful and willing to share information.

I installed mine last year and it went just as easy. I decided to make it stronger and very permanent by filling all the voids between the kickstand and pad with JB weld before screwing the kickstand pad on.

Nice! Thank you

[dirtbill]

20190503_161957.jpg (284.31 KiB) Viewed 8379 times

Here is my version made from a snowmobile slider.

Can someone help me out and take a picture of their kickstand spring I lost mine and need to figure out what I'm missing

[dirtbill]

double post

[hooter]

Where can I buy one of these? I looked on the Beta USA site but I couldn’t find it.

[Dezzzmomike]

Where can I buy one of these? I looked on the Beta USA site but I couldn’t find it.

I purchased mine at:
https://www.betamotorcycle.com/news/201 ... kstand-pad

[hooter]

Thanks!

My 300RR is a 2015 so I was looking there, but I eventually found it listed under the 2019 bike. https://shop.betausa.com/p/oversized-kick-stand-pad

[Dezzzmomike]

Thanks!

My 300RR is a 2015 so I was looking there, but I eventually found it listed under the 2019 bike. https://shop.betausa.com/p/oversized-kick-stand-pad

The link you provided is not the same pad style as the one described in this video post. Beta site sells the LARGE oval shaped example. A company in Australia makes the slightly smaller ones in various colors. Sierra Motorcycle Supply in Sparks, NV sells the correct Australian example.

If you are looking for the one that is the same as the one in the video in this post then here is the correct link:

https://shopbetamotorcycle.com/products ... kstand-pad

[hooter]

Thanks for the clarification