Broken speedo mounting

[sbeec0505]

5625431B-8C8A-4A15-B5E7-BBE0456C390B_4_5005_c.jpeg (15.93 KiB) Viewed 3909 times

A while ago I ended up pile driving some trees with my 2018 300RR.....smashing my front plate into the triple clamps and breaking the two speedo mounts to the speedo plate.

Has this happened to anybody else? I'm thinking of trying some epoxy for a "fix" before purchasing a replacement. the broken material is the speedo body and is hard plastic.
Any thoughts about an cement/adhesive that would give a permanent bond for this application ?

Rich

[sbeec0505]

2nd pic-

F238A312-0324-409B-8D4C-3293213D6B5C_4_5005_c.jpeg (16.69 KiB) Viewed 3908 times

2nd pic-

[mtdirtbag]

If your dealer is close by, check with them they may have a non-working one that you can swap your internals to. I had a broken battery cover and stopped by my dealer and they replaced it with one from a bad computer, best part was that it was free.

[sbeec0505]

If your dealer is close by, check with them they may have a non-working one that you can swap your internals to. I had a broken battery cover and stopped by my dealer and they replaced it with one from a bad computer, best part was that it was free.

It's worth a try.....