Beta Riders Club Discussion Forum

Posted: **Sun Dec 27, 2020 10:14 am**

: 5625431B-8C8A-4A15-B5E7-BBE0456C390B_4_5005_c.jpeg (15.93 KiB) Viewed 4106 times

A while ago I ended up pile driving some trees with my 2018 300RR.....smashing my front plate into the triple clamps and breaking the two speedo mounts to the speedo plate.

Has this happened to anybody else? I'm thinking of trying some epoxy for a "fix" before purchasing a replacement. the broken material is the speedo body and is hard plastic.
Any thoughts about an cement/adhesive that would give a permanent bond for this application ?

Rich

Posted: **Sun Dec 27, 2020 10:15 am**

2nd pic-

: F238A312-0324-409B-8D4C-3293213D6B5C_4_5005_c.jpeg (16.69 KiB) Viewed 4105 times

2nd pic-

Posted: **Sun Dec 27, 2020 12:56 pm**

If your dealer is close by, check with them they may have a non-working one that you can swap your internals to. I had a broken battery cover and stopped by my dealer and they replaced it with one from a bad computer, best part was that it was free.

Posted: **Mon Dec 28, 2020 6:37 pm**

mtdirtbag wrote:If your dealer is close by, check with them they may have a non-working one that you can swap your internals to. I had a broken battery cover and stopped by my dealer and they replaced it with one from a bad computer, best part was that it was free.

It's worth a try.....

Beta Riders Club Discussion Forum

Broken speedo mounting

Broken speedo mounting

Re: Broken speedo mounting

Re: Broken speedo mounting

Re: Broken speedo mounting