Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.
by GMP » Thu Nov 13, 2014 9:11 am
Been using cable/conduit pulling lube for Tubliss lately with great results. I had used Slime for a few years as a lube/sealer but it can make removal of fronts a PIA as the liner tends to stick hard to the tire bead, making it easy to grab and damage it. This is my only gripe with Tubliss and I was always looking for a solution and I think I have found it. It both helps seal the liner and allows it to release on deflation. This works great for both new liner install, sealing aide, and mounting lube. It lets the bead on some stiff bead tires like trials tires push out of the drop center very easy. A lot neater than Slime too and no cleanup needed before a new tire install. So far I have a 100% success rate with no leaks. Now, I don't and never have used Slime as a flat preventor. If you need to I'm not sure of the compatability. Cheap too at Home Depot:
http://www.homedepot.com/p/Klein-Tools- ... /100660155
Glenn
'13 Beta 300RR Racing
-
GMP
-
- Posts: 2128
- Joined: Wed Jul 31, 2013 5:25 am
by Enmerdeur » Thu Nov 13, 2014 1:21 pm
I have always had good results with armor all.
2017 KTM 450 XCF
2014 Beta 300 RR
-
Enmerdeur
-
- Posts: 881
- Joined: Fri Oct 11, 2013 2:52 pm
- Location: American Fork, Utah
by burstcasino » Sun Dec 09, 2018 2:53 am
Yamaha tire mount spray works graet and then evaporates.
2017 Beta 300 RR RE
2001 KTM 520 EXC Dual Sport convert
---- Retired------
'12 Husky WR300
'99 Yamaha YZ250
'98 Yamaha YZ400
'95 Suzuki RMX250
'92 Suzuki RMX250
'86 Suzuki PE175
-
burstcasino
-
- Posts: 36
- Joined: Fri Oct 07, 2016 11:50 am
- Location: Austin, Texas
-
by Lotus54 » Sun Dec 09, 2018 9:25 am
Wire lube works pretty well.
I personally use ‘RuGlyde’ tire mount lube. It works really well, doesn’t harden or leave a mess.
https://www.napaonline.com/en/p/BK_7651338
Beta XTrainer 300, Electric Motion Escape ‘R’, OSSA Super Pioneer 1975, Benelli 750 sei, more
-
Lotus54
-
- Posts: 57
- Joined: Sat Oct 10, 2015 6:23 pm
- Location: Port Angeles, Washington USA
by ride2little » Wed Dec 12, 2018 11:25 am
RuGlyde worked for me, as did ArmorAll as has a spray bottle full of soap/water. I feel soap/water is the least residual.
~MK~
2018 Beta 300rr
2009 BMW F800GS
2019 Honda Monkey
-
ride2little
-
- Posts: 41
- Joined: Tue Dec 26, 2017 12:45 pm
- Location: Franklin, TN
by NZMarkb » Wed Dec 12, 2018 11:54 pm
Armour all
It's what tubliss recomend
If your not willing to stand behind our troops
Then try standing in front of them
-
NZMarkb
-
- Posts: 154
- Joined: Sun Dec 13, 2015 6:06 pm
- Location: Auckland New Zealand
Return to Chassis & Body
Who is online
Users browsing this forum: No registered users and 108 guests