Main bearing failures on 2018 2019 2020 Xtrainer RR250 & 300

General Announcements, General Questions, e.g. What bike do I buy?, etc.

Re: Main bearing failures on 2018 2019 2020 Xtrainer RR250 &

Postby kzoo » Sun Sep 13, 2020 3:53 pm

My 2020 300rr with approx 10hrs now appears to have a failed left side bearing....
kzoo
 
Posts: 15
Joined: Fri Jun 26, 2020 4:49 pm

Re: Main bearing failures on 2018 2019 2020 Xtrainer RR250 &

Postby kzoo » Thu Sep 24, 2020 2:26 pm

I think I can account for a total of two bad bearing issues?

Beta sent a replacement motor due to the bearing failure on my 2020 300...

The replacement has what may be a bad bearing.

Both motors are being sent back to Beta...
kzoo
 
Posts: 15
Joined: Fri Jun 26, 2020 4:49 pm

Re: Main bearing failures on 2018 2019 2020 Xtrainer RR250 &

Postby aj_mariner » Thu Sep 24, 2020 6:08 pm

Good grief
‘17 300 RE - gone
‘22 300 RE
aj_mariner
 
Posts: 755
Joined: Wed May 17, 2017 12:53 pm
Location: Glacier, WA

Re: Main bearing failures on 2018 2019 2020 Xtrainer RR250 &

Postby kzoo » Fri Sep 25, 2020 3:01 pm

aj_mariner wrote:Good grief


That's one way to put it... I used a lot of "French" words...
kzoo
 
Posts: 15
Joined: Fri Jun 26, 2020 4:49 pm

Re: Main bearing failures on 2018 2019 2020 Xtrainer RR250 &

Postby Jonny360 » Thu Jan 21, 2021 5:20 pm

Just had a main bearing failure on my 2018 250rr. Its a higher mileage bike with 176hrs on it. Started to get the squeal and took the bike in right away. Since this bike has higher mileage and the bearing didn't actually break beta is calling it normal wear and tear. It still seems suspect to me to have a main bearing fully fail at 176hrs but betas reply was that anything over 90hrs they are calling normal wear and that most of their main bearing failures are under 10hrs. So it seems ill be on the hook for this one.
Jonny360
 
Posts: 1
Joined: Wed Jan 20, 2021 6:29 pm

Re: Main bearing failures on 2018 2019 2020 Xtrainer RR250 &

Postby twowheels » Wed Mar 31, 2021 7:22 pm

Jonny360 wrote:Just had a main bearing failure on my 2018 250rr. Its a higher mileage bike with 176hrs on it. Started to get the squeal and took the bike in right away. Since this bike has higher mileage and the bearing didn't actually break beta is calling it normal wear and tear. It still seems suspect to me to have a main bearing fully fail at 176hrs but betas reply was that anything over 90hrs they are calling normal wear and that most of their main bearing failures are under 10hrs. So it seems ill be on the hook for this one.


Sorry to hear that, but clearly the bike is out of warranty and its at Beta's discretion whether they fix it or not. On the other hand, I've seen more than one instance where they cover fork tube replacement at elevated time-in-service such as this.
http://www.afterhourscycle.com by PlusOnePerformance - Superior Service the World Over
Michigan's Vertigo, Beta and TM Race Headquarters
twowheels
 
Posts: 1226
Joined: Tue Jul 30, 2013 7:48 am
Location: In the woods near Milford, MI

Re: Main bearing failures on 2018 2019 2020 Xtrainer RR250 &

Postby Jondenison » Thu Apr 08, 2021 10:51 am

My 2016 250 rr had a main bearing failure. Destroyed my piston but luckily the barrel survived. I love beta but after this I don't know if I can buy another. My bike had an easy life so far but the hour meter is broken, I do think its done less than 100 hrs though!
Jondenison
 
Posts: 1
Joined: Thu Apr 08, 2021 5:06 am

Re: Main bearing failures on 2018 2019 2020 Xtrainer RR250 &

Postby wiscorider » Fri Apr 30, 2021 8:22 am

usa 2020 beta 300 rr 2t Enduro 5 hours main bearing seized. what a great day, thanks!
wiscorider
 
Posts: 1
Joined: Fri Apr 30, 2021 7:37 am

Previous

Return to General Discussions & Announcements

Who is online

Users browsing this forum: No registered users and 203 guests