Hi All,
2019 Bete 500RRS well had two stock horns fail, purchase after market same, they work after install then after a few they quit.
Ground is good and voltage is fine all work with momentary switch, just horn quits. Not sure what happens during the ride and why the failures.
Thought a over voltage issue but would need to happen when riding.
Horn Failures
3 posts
• Page 1 of 1
Horn Failures
by Afterburner » Fri Apr 10, 2020 8:27 pm
- Afterburner
- Posts: 4
- Joined: Mon Jul 08, 2019 8:37 am
Re: Horn Failures
by LRM » Sat Apr 11, 2020 6:56 am
I have found, when mine failed, that if I backed the little brass adjustment screw on the hour, out a 1/4 of a turn.It would work not only again but better than before.
The only time you need he 2nd Amendment, is when someone comes to take I away!
- LRM
- Posts: 125
- Joined: Sat Mar 30, 2019 9:38 am
Re: Horn Failures
by Cruiser » Sat Apr 18, 2020 1:59 pm
These are cheap horns used by most euro bike manufacturers. Just get a cheap eBay or amazon replacement. Only $10-14. Mine cheap one lasted an entire season. Once they get a good amount of mud and dust inside they stop working.
Cruiser
16 350RR
04 450/525sx/exc frankenbike
16 350RR
04 450/525sx/exc frankenbike
- Cruiser
- Posts: 154
- Joined: Mon Jan 18, 2016 1:47 pm
- Location: Jim Thorpe Pa
3 posts
• Page 1 of 1
Return to General Discussions & Announcements
Who is online
Users browsing this forum: Google [Bot] and 129 guests