Paid $130 from EE, would like to get $95 for it
EnduroEngineering Skid Plate 250/300RR - NEW
10 posts
• Page 1 of 1
EnduroEngineering Skid Plate 250/300RR - NEW
by typeone » Thu Apr 28, 2016 1:28 pm
Selling a brand new, never installed EnduroEngineering aluminum skid plate for 2013-2016 250/300 RR
Paid $130 from EE, would like to get $95 for it
Paid $130 from EE, would like to get $95 for it
'13 250RR / '19 200RR / '22 200RE
- typeone
- Posts: 209
- Joined: Tue Jun 03, 2014 7:14 am
- Location: central MA
Re: EnduroEngineering Skid Plate 250/300RR - NEW
by nevermind » Fri Apr 29, 2016 4:55 am
Free bump...
Mine is fairly light, just a tad heavier than the plastic Hyde (I have that on my 525EXC) and should survive nuclear war. I've added a bit of dyna-mat to the inside of the skid plate to dampen noise. I've had transmission oil and 2T mix spill and then sit on the dyna-mat and it is totally unaffected. IMHO, this combo is very strong and more quiet than the plastic skids.
Mine is fairly light, just a tad heavier than the plastic Hyde (I have that on my 525EXC) and should survive nuclear war. I've added a bit of dyna-mat to the inside of the skid plate to dampen noise. I've had transmission oil and 2T mix spill and then sit on the dyna-mat and it is totally unaffected. IMHO, this combo is very strong and more quiet than the plastic skids.
- nevermind
- Posts: 175
- Joined: Mon Jun 22, 2015 8:25 am
- Location: Lost in the woods...
Re: EnduroEngineering Skid Plate 250/300RR - NEW
by typeone » Fri Apr 29, 2016 6:36 am
thnx, nevermind! if it doesn't go i'll just keep it, super nice skid but decided to give P3's new MotoFlex a try.
'13 250RR / '19 200RR / '22 200RE
- typeone
- Posts: 209
- Joined: Tue Jun 03, 2014 7:14 am
- Location: central MA
Re: EnduroEngineering Skid Plate 250/300RR - NEW
by BAD ASS TA WS6 » Fri May 13, 2016 12:17 pm
Where you located typeone Im in Nashua/Manchester area? Need a skid for my 250
Rob
Rob
- BAD ASS TA WS6
- Posts: 1
- Joined: Mon Apr 18, 2016 7:18 am
- Location: NH
Re: EnduroEngineering Skid Plate 250/300RR - NEW
by typeone » Mon May 16, 2016 5:46 am
Rob, i sent you a PM as well but i'm right down the road from Mt Wachusett in central MA.
'13 250RR / '19 200RR / '22 200RE
- typeone
- Posts: 209
- Joined: Tue Jun 03, 2014 7:14 am
- Location: central MA
Re: EnduroEngineering Skid Plate 250/300RR - NEW
by Ctkny » Mon May 16, 2016 4:23 pm
Still have it? You shipping for that priced too?? PayPal?
- Ctkny
- Posts: 33
- Joined: Mon Feb 29, 2016 1:18 pm
- Location: New York
Re: EnduroEngineering Skid Plate 250/300RR - NEW
by typeone » Tue May 17, 2016 5:58 am
still have it, if Rob doesn't take it i'll hit you up, Ctkny.
'13 250RR / '19 200RR / '22 200RE
- typeone
- Posts: 209
- Joined: Tue Jun 03, 2014 7:14 am
- Location: central MA
Re: EnduroEngineering Skid Plate 250/300RR - NEW
by typeone » Thu May 19, 2016 5:57 am
SOLD
'13 250RR / '19 200RR / '22 200RE
- typeone
- Posts: 209
- Joined: Tue Jun 03, 2014 7:14 am
- Location: central MA
Re: EnduroEngineering Skid Plate 250/300RR - NEW
by Ctkny » Sat May 21, 2016 12:40 pm
Thanks. Showed today.
- Ctkny
- Posts: 33
- Joined: Mon Feb 29, 2016 1:18 pm
- Location: New York
Re: EnduroEngineering Skid Plate 250/300RR - NEW
by typeone » Sun May 22, 2016 11:03 am
cool. enjoy bashing it up 
'13 250RR / '19 200RR / '22 200RE
- typeone
- Posts: 209
- Joined: Tue Jun 03, 2014 7:14 am
- Location: central MA
10 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 60 guests