2014 beta 300rr tall seat and boana 30mm bar risers

New/Used Components and All Bike Part Outs

2014 beta 300rr tall seat and boana 30mm bar risers

Postby Fasterlapdunn » Thu Dec 26, 2019 3:39 pm

Hi All, I have a factory tall seat for a 2014 beta 300rr. Located in Winston-Salem NC. Make an offer. Will trade for low seat. I'm using the stock seat. I also have the Boana 30mm aluminum bar risers set. Thanks!
Last edited by Fasterlapdunn on Fri Dec 27, 2019 8:40 am, edited 1 time in total.
Fasterlapdunn
 
Posts: 12
Joined: Sun Dec 22, 2019 9:35 am

Re: 2014 beta 300rr tall seat

Postby iamovru » Fri Dec 27, 2019 12:49 am

I`ll take it! $75 and I`ll pay shipping.
2015 Beta 300 RR Race :)
2015 350XC-F that is far from stock
2011 GasGas 300EC ( STOLEN BY A SCUM BAG!)
2009 450EXC Sold to Rapid Dog
2009 300XC
2005 525 MXC
2000 WR 400
1996 XR 600
1987 CR500
1990 KX500

Member-(BCORMA)
iamovru
 
Posts: 137
Joined: Thu Sep 04, 2014 12:32 pm
Location: Scottsdale AZ

Re: 2014 beta 300rr tall seat and boana 30mm bar risers

Postby Fasterlapdunn » Fri Dec 27, 2019 8:48 am

The tall seat and low seat are $269.99 each!!?? I just checked, so I need a little more than $75 to put towards a low seat. I also have the Boana 30mm bar risers which I have to replace cuz the PO lost the stock clamps. So I'm needing $125 for the seat and $75 for the clamps.
Fasterlapdunn
 
Posts: 12
Joined: Sun Dec 22, 2019 9:35 am

Re: 2014 beta 300rr tall seat and boana 30mm bar risers

Postby iamovru » Fri Dec 27, 2019 9:15 am

Fasterlapdunn wrote:The tall seat and low seat are $269.99 each!!?? I just checked, so I need a little more than $75 to put towards a low seat. I also have the Boana 30mm bar risers which I have to replace cuz the PO lost the stock clamps. So I'm needing $125 for the seat and $75 for the clamps.


Thanks Faster, I`ll pass this time.
2015 Beta 300 RR Race :)
2015 350XC-F that is far from stock
2011 GasGas 300EC ( STOLEN BY A SCUM BAG!)
2009 450EXC Sold to Rapid Dog
2009 300XC
2005 525 MXC
2000 WR 400
1996 XR 600
1987 CR500
1990 KX500

Member-(BCORMA)
iamovru
 
Posts: 137
Joined: Thu Sep 04, 2014 12:32 pm
Location: Scottsdale AZ

Re: 2014 beta 300rr tall seat and boana 30mm bar risers

Postby Fasterlapdunn » Sun Dec 29, 2019 1:13 pm

I shave the tall seat, worked out really well. I still have the riser clamps.
Fasterlapdunn
 
Posts: 12
Joined: Sun Dec 22, 2019 9:35 am


Return to Parts

Who is online

Users browsing this forum: No registered users and 75 guests