KYB twin chambers fit Beta.
5 posts
• Page 1 of 1
KYB twin chambers fit Beta.
by Timber » Mon Aug 04, 2014 2:16 pm
I've got a set of Husky kyb twin chambers for sale from a 2012 husky CR 125 that will go right on the beta. They have 4 hours on them. $400.
- Timber
- Posts: 123
- Joined: Sun Aug 04, 2013 6:44 pm
Re: KYB twin chambers fit Beta.
by twowheels » Mon Aug 04, 2014 8:31 pm
Check your PMs.
http://www.afterhourscycle.com by PlusOnePerformance - Superior Service the World Over
Michigan's Vertigo, Beta and TM Race Headquarters
Michigan's Vertigo, Beta and TM Race Headquarters
- twowheels
- Posts: 1226
- Joined: Tue Jul 30, 2013 7:48 am
- Location: In the woods near Milford, MI
Re: KYB twin chambers fit Beta.
by Hyde » Tue Aug 05, 2014 5:47 am
Dam, I would have jumped on these.
23' 430RE
23' 250RE
21' 350RE
20', 200rr, gone
20', 250rr, Ye-haw !
18', 250rr,gone
18' 125rr, KYB forks, gone
16' 250rr, KYB forks-sold
15' 250rr RE-sold
14' 450rr, gone
14' 250rr-sold
14' 450rr KYB forks.
23' 250RE
21' 350RE
20', 200rr, gone
20', 250rr, Ye-haw !
18', 250rr,gone
18' 125rr, KYB forks, gone
16' 250rr, KYB forks-sold
15' 250rr RE-sold
14' 450rr, gone
14' 250rr-sold
14' 450rr KYB forks.
- Hyde
- Posts: 391
- Joined: Wed Sep 04, 2013 6:45 am
Re: KYB twin chambers fit Beta.
by GMP » Tue Aug 05, 2014 6:44 am
From looking at my brother's set from his 310, it all bolts right up, including the Beta carrier to the KYB lug. I did not measure the wheel/spacer/lug dimmensions so can't comment if they are the same but they look very close. It would have been real good for me as I use a spare Husky wheel so that will work straight up for sure. I see custom spacers for the Beta wheel and possibly shim the caliper carrier at the most. Easy.
Glenn
'13 Beta 300RR Racing
'13 Beta 300RR Racing
- GMP
- Posts: 2128
- Joined: Wed Jul 31, 2013 5:25 am
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 101 guests