EE Rad Guards 300RR

Feedback & Comments on Products Tested

Re: EE Rad Guards 300RR

Postby Darkside » Wed Mar 26, 2014 8:22 am

twowheels; you sell your own brand or ? If it's the Beta accessory that is on the AmBeta site the instructions on their support site show having to move the rectifier.


I just installed Am Beta guards. filed the little tit on the rectifier and rotated a few degrees. No big deal.
Randy
2018 390 rrs, 2014 300 rr re, 2010 ktm 450 exc
Darkside
 
Posts: 449
Joined: Tue Jul 30, 2013 12:53 pm
Location: SF Bay Area

Re: EE Rad Guards 300RR

Postby flybars » Wed Aug 27, 2014 1:36 pm

I have the ambeta rad guards thru byob program. Has anyone here added a front grill to these guards yet? I wonder if Steves grills would work? Any suggestions welcome.
'14 300rr
flybars
 
Posts: 281
Joined: Tue Jul 30, 2013 9:03 pm
Location: Cashmere, WA, USA

Re: EE Rad Guards 300RR

Postby jump64 » Tue Oct 14, 2014 1:39 pm

Thanks for the helpful information, made my install much smoother.
As a side note on the 2015 did not have to move the rectifier there was enough clearance, and used the stock horn mount.
I did have to trim the inside edges of the radiator shrouds and the louvers to fit.
'18 300 RR Race
'13 KTM 300 XC-W
'17 390 Race - traded
'15 300RR - sold
'11 Evo 290
'06 KTM 450 EXC - sold
User avatar
jump64
 
Posts: 55
Joined: Mon Oct 06, 2014 9:29 am
Location: Fort Collins, Colorado

Re: EE Rad Guards 300RR

Postby Calgarytrev » Tue Oct 14, 2014 6:00 pm

I went ahead and bought two wheels rad guards, I'll post a pic when they arrive this week to compare the two
Calgarytrev
 
Posts: 47
Joined: Tue Jul 30, 2013 7:37 am
Location: calgary alberta canada

Re: EE Rad Guards 300RR

Postby ks9mm » Tue Nov 18, 2014 4:41 pm

My EE rad and hand guards were installed by dealer before I picked up the bike..

Since my bike is pretty prone to falling down..I am confident that they are now well tested. So far so good.
2014 Beta 300RR
2015 Husky TE125 (sold)
Husky WR300 (sold)
Husky TE510 supermoto sold
ks9mm
 
Posts: 293
Joined: Tue Jul 15, 2014 10:59 am
Location: NJ

Re: EE Rad Guards 300RR

Postby mikl525 » Mon May 04, 2015 5:30 am

Did you have any issue with the radiator fairing and having to trim the inside of it to fit around the EE guard?
mikl525
 
Posts: 4
Joined: Fri Apr 24, 2015 10:47 pm

Re: EE Rad Guards 300RR

Postby ks9mm » Mon May 04, 2015 12:20 pm

Dealer installed mine, so I am not sure if there were any issues. I do not see anything being trimmed other than rectifier repositioned.
2014 Beta 300RR
2015 Husky TE125 (sold)
Husky WR300 (sold)
Husky TE510 supermoto sold
ks9mm
 
Posts: 293
Joined: Tue Jul 15, 2014 10:59 am
Location: NJ

Re: EE Rad Guards 300RR

Postby Enmerdeur » Mon May 04, 2015 1:37 pm

mikl525 wrote:Did you have any issue with the radiator fairing and having to trim the inside of it to fit around the EE guard?


I think I only had to trim the louvers. Didn't have to touch the shrouds.
2017 KTM 450 XCF
2014 Beta 300 RR
User avatar
Enmerdeur
 
Posts: 881
Joined: Fri Oct 11, 2013 2:52 pm
Location: American Fork, Utah

Re: EE Rad Guards 300RR

Postby mikl525 » Thu May 07, 2015 8:01 pm

Enmerdeur wrote:
mikl525 wrote:Did you have any issue with the radiator fairing and having to trim the inside of it to fit around the EE guard?


I think I only had to trim the louvers. Didn't have to touch the shrouds.


Okay thanks. Are you running the bottom bolt or using the rubber strap that some EE guards tend to use? My shrouds will need to be trimmed on the inside to make them sit flush it looks like.
Attachments
image1.jpg
EE guards
image1.jpg (411.66 KiB) Viewed 10020 times
mikl525
 
Posts: 4
Joined: Fri Apr 24, 2015 10:47 pm

Re: EE Rad Guards 300RR

Postby pguerci » Fri Jun 26, 2015 8:26 am

Does the cooling fan still fit in the right hand rad when using these EE braces? It should seat at the very bottom part of the rad but I see in the picture that' it is occupied with the brace. Then fitting the fan about an inch higher not sure if will cause an problem with the gas tank.

Anyone tried these EE guards also with the cooling fan installed? (this doesn't seam to be an issue with the AmBeta rad guards)

I'd like to order one of these, like them...
Pablo
'15 Beta 300RR; '13 Beta 350 Factory; '12 Beta 350RR; '11 Beta 450RR; '08 WR450
pguerci
 
Posts: 62
Joined: Mon Jun 08, 2015 2:54 pm

PreviousNext

Return to Product Reviews

Who is online

Users browsing this forum: No registered users and 63 guests