MotionPro Micro Bleeders

Feedback & Comments on Products Tested

Re: MotionPro Micro Bleeders

Postby DaddyTJ » Sat Sep 16, 2017 4:12 am

I have had a set of Motion Pro bleeders ( same set ) on my 2015 and 2017 300's and love them. Actually every Motion Pro tool or accessory I have purchased has been top notice.
2017 Beta 300 RR
2015 Beta 300 RR
2008 KTM 300 XC-W Bye Bye
2010 Husaberg 450 FE Bye Bye
DaddyTJ
 
Posts: 115
Joined: Sat Oct 11, 2014 6:40 pm

Re: MotionPro Micro Bleeders

Postby little_wing » Sat Sep 16, 2017 1:08 pm

yes I will have to agree. my MotionPro bleeders work fine, I can adjust the clickers and I have no issue.
2015 beta 250RR
little_wing
 
Posts: 208
Joined: Tue Mar 22, 2016 1:19 pm
Location: ontario canada

Re: MotionPro Micro Bleeders

Postby mtnmanseth » Tue Sep 11, 2018 1:45 pm

JoeMaico wrote:I use the ones that came from Beta for a BYOB on my 16 300 RE. They also hung up when I would adjust the compression settings. I just took them off and filed the ends of the plastic adjusters down a bit - problem solved.

joe


Interesting - thanks for this idea. Any clue if you're using Motion Pro part #11-0089? I need some for '17 RE forks.
2017 Beta 300RR Race
2014 Beta 498RR
2005 GasGas EC300
mtnmanseth
 
Posts: 62
Joined: Sun Mar 29, 2015 6:00 pm
Location: SW Idaho

Re: MotionPro Micro Bleeders

Postby Goatse » Tue Sep 11, 2018 5:06 pm

mtnmanseth wrote:
JoeMaico wrote:I use the ones that came from Beta for a BYOB on my 16 300 RE. They also hung up when I would adjust the compression settings. I just took them off and filed the ends of the plastic adjusters down a bit - problem solved.

joe


Interesting - thanks for this idea. Any clue if you're using Motion Pro part #11-0089? I need some for '17 RE forks.


What he said. I started burping my forks more and it's a very noticeable difference.
Goatse
 
Posts: 180
Joined: Fri Oct 21, 2016 10:09 am
Location: Alberta, Canada

Re: MotionPro Micro Bleeders

Postby hytechf85 » Wed Feb 13, 2019 2:14 pm

I have the 11-0089 MP bleeders as well.
1: if installing take the bars off don't try with them on..i'll get to that
2: remove the old plug/screws...don't loose ( if you wish to keep them for later) they are small.
3:*** use a screw driver (flat head) that has little to no play in the head ( and not rounded from using as a chisel) to the slot of the bleeder.
4: add just a little water proof assembly grease to keep the o-ring soft on the bleeder
5: thread in by hand first then, snug perpendicular to the Head of the bleeder with the appropriate screwdriver**

***not doing so WILL gouge the top of the Bleeder's gold anodized ring...they are delicate

And BTW if you have a Race Edition with the CC forks ...as mentioned you will have to remove the tri-lobe clicker knobs and file 1-1.5mm off each lobe....unless you don't wish to adjust your forks.
2017 250RR RE
hytechf85
 
Posts: 1
Joined: Tue Feb 12, 2019 9:50 am
Location: SE Michigan

Re: MotionPro Micro Bleeders

Postby LRM » Sun Mar 31, 2019 10:09 am

I've had the Motion Pro Bleeders on all of my bike for the last decade +. I currently have them on my 2015 350 6Days and my 2018 TE250. I pick up a new 2018 Xtrainer on Friday, Apr 5th and if I can get them for it. it will have them too. IMO, they are he best on the market.
The only time you need he 2nd Amendment, is when someone comes to take I away!
LRM
 
Posts: 125
Joined: Sat Mar 30, 2019 9:38 am

Re: MotionPro Micro Bleeders

Postby LRM » Sat Apr 06, 2019 7:39 am

LRM wrote:I've had the Motion Pro Bleeders on all of my bike for the last decade +. I currently have them on my 2015 350 6Days and my 2018 TE250. I pick up a new 2018 Xtrainer on Friday, Apr 5th and if I can get them for it. it will have them too. IMO, they are he best on the market.



Got my new Xtrainer Thursday. As all of you probably know, you can't put bleeders on the Olli forks. LOL
The only time you need he 2nd Amendment, is when someone comes to take I away!
LRM
 
Posts: 125
Joined: Sat Mar 30, 2019 9:38 am

Re: MotionPro Micro Bleeders

Postby wwguy » Sat Apr 06, 2019 8:52 am

LRM wrote:Got my new Xtrainer Thursday. As all of you probably know, you can't put bleeders on the Olli forks. LOL


LMAO at your LOL! :lol:

X trainer fork bleeder mod

Suspension Matters Xtrainer fork upgrades

Xtrainer fork air bleeders
wwguy
 
Posts: 288
Joined: Thu Apr 28, 2016 12:59 pm
Location: Boise, ID USA

Previous

Return to Product Reviews

Who is online

Users browsing this forum: Majestic-12 [Bot] and 82 guests