Beta Riders Club Discussion Forum

I have had a set of Motion Pro bleeders ( same set ) on my 2015 and 2017 300's and love them. Actually every Motion Pro tool or accessory I have purchased has been top notice.

yes I will have to agree. my MotionPro bleeders work fine, I can adjust the clickers and I have no issue.

JoeMaico wrote:I use the ones that came from Beta for a BYOB on my 16 300 RE. They also hung up when I would adjust the compression settings. I just took them off and filed the ends of the plastic adjusters down a bit - problem solved.

joe

Interesting - thanks for this idea. Any clue if you're using Motion Pro part #11-0089? I need some for '17 RE forks.

mtnmanseth wrote:

JoeMaico wrote:I use the ones that came from Beta for a BYOB on my 16 300 RE. They also hung up when I would adjust the compression settings. I just took them off and filed the ends of the plastic adjusters down a bit - problem solved.

joe

Interesting - thanks for this idea. Any clue if you're using Motion Pro part #11-0089? I need some for '17 RE forks.

What he said. I started burping my forks more and it's a very noticeable difference.

I have the 11-0089 MP bleeders as well.
1: if installing take the bars off don't try with them on..i'll get to that
2: remove the old plug/screws...don't loose ( if you wish to keep them for later) they are small.
3:*** use a screw driver (flat head) that has little to no play in the head ( and not rounded from using as a chisel) to the slot of the bleeder.
4: add just a little water proof assembly grease to keep the o-ring soft on the bleeder
5: thread in by hand first then, snug perpendicular to the Head of the bleeder with the appropriate screwdriver**

***not doing so WILL gouge the top of the Bleeder's gold anodized ring...they are delicate

And BTW if you have a Race Edition with the CC forks ...as mentioned you will have to remove the tri-lobe clicker knobs and file 1-1.5mm off each lobe....unless you don't wish to adjust your forks.

I've had the Motion Pro Bleeders on all of my bike for the last decade +. I currently have them on my 2015 350 6Days and my 2018 TE250. I pick up a new 2018 Xtrainer on Friday, Apr 5th and if I can get them for it. it will have them too. IMO, they are he best on the market.

LRM wrote:I've had the Motion Pro Bleeders on all of my bike for the last decade +. I currently have them on my 2015 350 6Days and my 2018 TE250. I pick up a new 2018 Xtrainer on Friday, Apr 5th and if I can get them for it. it will have them too. IMO, they are he best on the market.

Got my new Xtrainer Thursday. As all of you probably know, you can't put bleeders on the Olli forks. LOL

LRM wrote:Got my new Xtrainer Thursday. As all of you probably know, you can't put bleeders on the Olli forks. LOL

LMAO at your LOL!

X trainer fork bleeder mod

Suspension Matters Xtrainer fork upgrades

Xtrainer fork air bleeders