SRT threaded bar end bark buster mounts

[little_wing]

http://www.srtoffroad.com/srt-threaded-bar-end-mount-kit-w-tap
picked them up for 12 CND
they have two versions one comes with tap the other versions does not.
mine did not, the version with the tap is a few more bucks.
either version uses a 5/8-11 tap

install is simple.
clean the inside of the bars
tap the bars making sure only to tap far enough to have the threaded mount to sit flush with the end of the bar
install the threaded mount in to the bars with Red Loctite
then using the new allen bolt with a light dab of blue Loctite install the bark buster.

after the install it seems to be very strong and will not rotate or loosen up.

I have not rode the bike with this installed yet that will be this weekend but I am hoping the hair of extra weight will help to deaden normal 2 stroke handle bar vibrations.

I am sure that this a much better way to mount the outer ends of the bark busters to the bars. instead of the friction nuts that bark busters come with.

[wwguy]

Highway Dirt Bikes, BRP Moto, G2 Ergonomics, and perhaps others also offer similar threaded bar-end mounts. They work great for securing handguards. I haven't noticed any reduction in 2T engine vibration.