2020 PTech slave guard aka case saver for 2013

Feedback & Comments on Products Tested

2020 PTech slave guard aka case saver for 2013

Postby brantsdad » Tue Dec 03, 2019 1:48 pm

If anyone is wondering it works. It even has room for the Rekluse slave.
Attachments
E03FB186-8D0D-41CC-90D8-9215B9B7526C.jpeg
E03FB186-8D0D-41CC-90D8-9215B9B7526C.jpeg (33.2 KiB) Viewed 4374 times
2013 300RR
2004 Husqvarna 167 (125 big bore) I should have never sold her
brantsdad
 
Posts: 148
Joined: Tue Jan 28, 2014 7:39 pm
Location: Boise , ID

Re: 2020 PTech slave guard aka case saver for 2013

Postby Hurky » Wed Dec 04, 2019 3:20 am

Interesting, why are they marking the product for 2020 if it retro-fits ? :|

The one they officially have for 2018 is:
https://www.p-tech.ee/Beta-RR-250-300-c ... -2018-2019

That's the one I was planning to get for my RR 2019 , do you think the 2020 model is worth the price difference ?
I am using the OEM gearing 14-48 and I have a lot of chain nose on the front plastic guard as it 'slacks' during low throttle openings, maybe the 2020 model have a little more room there ?

Regards.
User avatar
Hurky
 
Posts: 38
Joined: Mon Aug 19, 2019 1:58 am

Re: 2020 PTech slave guard aka case saver for 2013

Postby brantsdad » Wed Dec 04, 2019 12:28 pm

I found this would work by talking to Lang's offroad up in Canada. The sizing was the same for this area from the Slave to the Frame.. I didn't like the other Ptech offering and I can still access the Rekluse slave for adjustments if needed...

As far as 19 vs 20.... do they both have the counterbalancer? and was wondering if the 20 has the KYBs
2013 300RR
2004 Husqvarna 167 (125 big bore) I should have never sold her
brantsdad
 
Posts: 148
Joined: Tue Jan 28, 2014 7:39 pm
Location: Boise , ID

Re: 2020 PTech slave guard aka case saver for 2013

Postby brantsdad » Wed Dec 04, 2019 1:26 pm

Sorry I misunderstood you were talking about the 2020 vs 2019 part price difference...

I like this part better as its more coverage if the chain comes off...
2013 300RR
2004 Husqvarna 167 (125 big bore) I should have never sold her
brantsdad
 
Posts: 148
Joined: Tue Jan 28, 2014 7:39 pm
Location: Boise , ID


Return to Product Reviews

Who is online

Users browsing this forum: No registered users and 59 guests

cron