Cross posting a bit from Thumpertalk,
I had my first real ride on my bike the other day. I have a few carburetor related questions.
I noticed this problem before I rejetted, the bike seemed to drip fuel out of the overflow at times. Usually noticed when I leaned it on it's kickstand. I always shut the fuel off when I'm done so I never had any leaking in my shop that I noticed. But yesterday while out on my ride, I stopped to setup the camera for some video and while the bike was idling I noticed fuel dripping out of the overflow. I noticed it too on a failed attempt over a tractor tire. Is it carb overflow hose routing? Float? Or is this normal?
The other thing that happened was as I rode on throughout the day, my idle seemed to pick up. So I backed down the idle adjustment screw. I just don't understand why it wasn't an issue early on. I made sure my throttle wasn't sticking. All was good there.
Currently the carb has the stock pilot, an NECJ needle and a 162 main jet. The air screw is turned out about 2.5 to 2.75 turns. I'm right around sea level give our take a few 100 feet. Temps were around 80F and fairly dry.
Any help would be greatly appreciated!