So I received my EE Rad guards the other day and mounted them up this morning.
They are typical EE build. Very robust.
A few small issues with fitment
1. The mounting holes that fit to the radiator mounts were just a tad to close together. Had to take a round file and open the top of the top hole and bottom of the bottom a bit.
2. On the right side guard they interfered with the rectifier. I loosened the rectifier to swing it up slightly and found that there is a locating pin on it to prevent rotation. So I filed the pin off and rotated is slightly
3. Had to trim some of the outside louver wings off to get them to fit back on.
Overall it looks like they will do the job