Picked them up today for 25 CND
Install was simple.
I run wrap round bark busters. so the ends had to be cut.
ODI is smart when it comes to this. all you do is stick a punch or a screw driver in the grip and give it a whack and the end comes off.
you do have to cut just the rubber but the plastic tube ends are molded very thin on where you need to cut to run bark busters so the plastic just breaks on a line from the factory.
I did have to file a small bur on the throttle side where the plastic did not break in a perfect circle. but the clutch side broke of in a perfect circle.
I choose the half waffle.
they are pretty tacky rubber
I did find that because they both have a plastic tube that the rubber is mated to the grips to me seem to be a bit larger diameter then normal glue on grips. but its a very very small difference.
I have yet to ride the bike, that should be this weekend I wil post here with what I think about then while riding